Silly Creature :}

I'm close to finishing Scarabs right hand.

Yay!

Also I realized at the start of making it that I suck at tutorials. Sorry. I'll try my best at explaining what I did but I can't promise it will be easy to follow.

Also! I will draw something about Scarab after posting the tutorial.

I finally added the wrist part(It's detachable because I'm not taking risks). Tomorrow I'll probably make the arms. Finally progress!

It's been a busy week for me and I got a new hyper fixation so my schedule is very funky.

Where is Pizza Steve

feeling a bit silly today

9. Now to wrap it in paper to hide the paper parts.(I obviously did this step wrong my first time.)

10. Now make a new finger for the thumb.(I forgot to write the measurements but i think it was 1 cm) Don't make the bottom cylinder and make sure the bottom is in two parts. Place and glue it however you like.

11. Glue more paper to make sure to strengthen it and not let it move.

And that's how you make a paper hand! Thank you for your kind words :)

I finally finished it! Here is the tutorial for the lil Scrabby hand :)

(I apologize in advance to my horrible explanation)

I used these materials; pen,pritt,needles,scissor,eraser,ruler,thread and of course paper.

1.First I took the measurements from the first hand. I used cm for information. I made the palm first. I made it longer than the original because I cut it to have the curve the base of the fingers have.

2. After it was done I half filled the bottom with the paper left over from the start of the project.(No paper wasting allowed). I left some space for the fingers. I also left a little space at the bottom because I'll make a movable wrist.

3. I made papers with little balls on the ends and cut out some paper for the bottom of the fingers. The long part of the finger paper can be as long as you want it to be because you can cut it after checking if it's thick enough. Don't forget to glue it so its shape stays.

4. After wrapping the finger I squished the top and made a small hole with a needle for the limb. I used the eraser as a table to not stab myself with it.

4.5. I forgot to take a photo :( . Well you do the same thing as step two for top of the finger parts you made. You have to make a small cut with your scissors so the finger can move. You also have to make small holes that line up to the ones you made at step before this(4). Don't forget it's okay to stab erasers with needles for your own safety.

5. And now you put the thread thru the holes and cut them. After that take a paper that is the same height as the finger and wrap it around with the thread under it.( don't close the small cut though)

6. I made small holes at the bottoms of the fingers and put the thread thru them.(Be careful and make sure the fingers are facing the right way)

7. I cut a small part at the front of the palm so the fingers can bend forward and made small holes on each side for the thread to go thru.

8. I glued some paper on each side to hold the thread and glued more paper between the fingers so they don't slip.

These have been sitting in my sketchbook(and mind) for a while. Also I definitely DID not forget after the accident Curly doesn't have hands. Definitely not.

I'm making a visual novel(yay)

I have to draw so so SO many things(wahh)

I am suffering the same curse that befalled many creators in the past and present...

I'll post some concept stuff later. I'm hungry.

I really like Kirby. I rather draw him with cake then as a car.

Some sketches of my Bill design for a Billford animatic I'm working on.

(I hope union yaoi works animating is HARD)

Hehe triangle

Tw: Gore

I’m thirsty Gordon!

Sussus beanus